ConformalLabpp/doc/math/validation.md

Mathematical Validation

This document lists analytically known results and explains how to verify them against conformallab++ output. It is the primary tool for an independent mathematician to check the correctness of the implementation.

---

How to run the examples

cmake -S code -B build -DWITH_CGAL=ON -DCMAKE_BUILD_TYPE=Release
cmake --build build --target conformallab_cgal_tests
ctest --test-dir build -R cgal --output-on-failure

All 170 tests pass (11 skipped by design — see doc/api/tests.md).

---

1 — Gauss–Bonnet (topology)

Theorem. For any closed triangulated surface M,

Σᵥ (2π − Θᵥ) = 2π · χ(M)

where χ(M) = 2 − 2g is the Euler characteristic.

Surface	g	χ	Σ(2π − Θᵥ)
Sphere (tetrahedron, cube, …)	0	2	4π
Torus	1	0	0
Double torus	2	−2	−4π

How to check:

#include "gauss_bonnet.hpp"
auto defect = gauss_bonnet_sum(mesh, maps);   // Σ(2π − Θᵥ)
auto chi    = mesh.euler_characteristic();
EXPECT_NEAR(defect, 2.0 * M_PI * chi, 1e-10);

Covered by: cgal.GaussBonnet.* tests in test_phase6.cpp.

---

2 — Period matrix: fundamental domain invariants

Theorem (SL(2,ℤ)-reduction). Every lattice τ ∈ ℍ has a unique representative in the standard fundamental domain

F = { τ ∈ ℍ :  |τ| ≥ 1,  |Re(τ)| ≤ 1/2,  Im(τ) > 0 }

After calling compute_period_matrix(hol), the returned τ must satisfy:

Condition	Invariant
pd.tau_reduced.imag() > 0	τ lies in the upper half-plane
std::abs(pd.tau_reduced) >= 1.0 - 1e-10	τ outside unit disk
std::abs(pd.tau_reduced.real()) <= 0.5 + 1e-10	τ in vertical strip

These three conditions hold for any closed genus-1 triangulated surface processed through Euclidean uniformization — they are topology, not geometry.

Covered by: cgal.PeriodMatrix.TauInFundamentalDomain_* tests in test_phase7.cpp.

---

3 — Square-symmetric torus

Setup. Take a torus mesh with 4-fold rotational symmetry around the z-axis (e.g. code/data/off/torus_4x4.off, which has M=4 columns of vertices).

Expected. The symmetry group Z₄ acts conformally. Conformal automorphisms of the torus correspond to SL(2,ℤ) symmetries of τ. The unique fixed point of a rotation of order 4 in the modular group is τ = i. Therefore:

For a mesh with exact 4-fold symmetry and uniform edge lengths:
    Re(τ) = 0  (to machine precision, by symmetry)
    Im(τ) ≈ 1  (approaches 1 as mesh is refined)

The coarse 4×4 mesh (torus_4x4.off) gives Im(τ) in (0.7, 1.3) depending on the 3D embedding (R=2, r=1 torus of revolution has unequal inner/outer edge lengths). The uniformization algorithm finds the conformal class of the abstract metric encoded in the edge lengths.

Manual verification (run from the build directory after adding a small program or reading from the test output):

ConformalMesh mesh; load_mesh(mesh, "code/data/off/torus_4x4.off");
EuclideanMaps maps = setup_euclidean_maps(mesh);
compute_euclidean_lambda0_from_mesh(mesh, maps);
enforce_gauss_bonnet(mesh, maps);
auto res = newton_euclidean(mesh, maps);
CutGraph cg = compute_cut_graph(mesh);
HolonomyData hol;
euclidean_layout(mesh, res.x, maps, &cg, &hol, true);
PeriodData pd = compute_period_matrix(hol);
// pd.tau_reduced satisfies the fundamental domain invariants above

---

4 — Hexagonal-symmetric torus

Setup. Take a torus mesh with 6-fold rotational symmetry (code/data/off/torus_hex_6x6.off, M=6).

Expected. The unique τ fixed under a rotation of order 6 in SL(2,ℤ) is τ = e^{iπ/3} = ½ + i√3/2. So:

Re(τ) = 0.5  (to machine precision, by symmetry)
Im(τ) = √3/2 ≈ 0.8660

The coarse 6×6 torus of revolution approximates this: Re(τ) ≈ 0.5 by symmetry, Im(τ) approaches √3/2 as the mesh is refined toward a flat hexagonal lattice.

---

5 — Newton convergence rate

Theorem. Because the Euclidean and hyper-ideal energies are strictly convex (after gauge-fixing), Newton's method converges quadratically near the optimum.

Expected: for any mesh with up to a few hundred faces, Newton converges in fewer than 30 iterations starting from u = 0.

auto res = newton_euclidean(mesh, maps);
EXPECT_LT(res.iterations, 30);
EXPECT_LT(res.gradient_norm, 1e-10);

Covered by: cgal.EuclideanPipeline.ConvRates_* and similar tests.

---

6 — Gradient check (finite differences)

For each functional F(u), the gradient G = ∂F/∂u is verified by:

|G(u)ᵢ  −  (F(u + εeᵢ) − F(u − εeᵢ)) / (2ε)| < 1e-6

with ε = 1e-5. This check is run inside the test suite for all three geometries (Euclidean, Spherical, HyperIdeal) at u = 0 and at random u.

Relevant test suites:

cgal.EuclideanFunctional.GradientCheck_*
cgal.SphericalFunctional.GradientCheck_*
cgal.HyperIdealFunctional.GradientCheck_*

A failing gradient check means the energy and its derivative are inconsistent — the Newton solver will converge to the wrong point.

---

7 — Holonomy composition (Möbius maps)

For a closed surface, the composition of holonomies around any contractible cycle must be the identity. In genus 1 with a single handle:

T₁ · T₂ · T₁⁻¹ · T₂⁻¹ = Id    (commutator = Id for a torus)

because π₁(T²) = ℤ × ℤ is abelian.

For genus g ≥ 2, the fundamental group is non-abelian and this check does not hold, but the representation ρ: π₁(Σ_g) → SU(1,1) must still satisfy the relation

[T₁, T₂] · [T₃, T₄] · … = Id    (product of g commutators = Id)

These are the holonomy consistency checks implemented in test_phase7.cpp (cgal.HolonomyData.*).

---

8 — Checklist for an independent reviewer

Run these in order to validate the implementation:

• ctest --test-dir build -R cgal --output-on-failure → 170 tests pass, 11 skip
• cgal.GaussBonnet.* all pass → topology is correctly read from mesh
• cgal.EuclideanFunctional.GradientCheck_* pass → energy = integral of gradient
• cgal.PeriodMatrix.TauInFundamentalDomain_* pass → SL(2,ℤ) reduction correct
• cgal.MobiusMap.Compose_* and Inverse_* pass → Möbius arithmetic correct
• cgal.HolonomyData.* pass → holonomy loops close up

All of the above are deterministic, analytic tests — no mesh loading, no file I/O, no floating-point non-determinism beyond standard IEEE-754.